BKRFL - ELITE DIAMOND FINISH - SATIN

  • MSDS: BKRFL
  • Manufacturer: FLECTO COMPANY
  • Product Name: ELITE DIAMOND FINISH - SATIN
  • National Stock Number: 8010-00B060029
Product Identification

Product ID:ELITE DIAMOND FINISH - SATIN
MSDS Date:01/08/1991
FSC:8010
NIIN:00B060029
MSDS Number: BKRFL

Responsible Party
FLECTO COMPANY
1000 45TH STREET
OAKLAND, CA 94608
US

Emergency Phone: 415-655-2470

Info Phone: 415-655-2470

Cage: DO858

Contractor
FLECTO COMPANY
OAKLAND, CA 94608 US

Telephone: 415-655-2470

Cage: DO858

Ingredients

1-METHYLPYRROLIDONE

CAS: 872-50-4

RTECS: UY5790000

Fraction By Weight: <5.0%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


PROPYLENE GLYCOL

CAS: 57-55-6

RTECS: TY2000000

Fraction By Weight: <5.0%


DIPROPYLENE GLYCOL METHYL ETHER

CAS: 34590-94-8

RTECS: JM1575000

Fraction By Weight: <5.0%

OSHA PEL S,100PPM/150STEL

ACGIH TLV: S,100PPM/150STEL9192


N-BUTOXYPROPANOL

CAS: 5131-66-8

Fraction By Weight: <5.0%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THE HEALTH EFFECTS OF THIS PRODUCT
HAVE NOT BEEN TESTED. MAY BE HARMFUL IF SWALLOWED.
Explanation of Carcinogenicity:NONE OF THE CHEMICALS IN THIS PRODUCT IS
LISTED BY IARC, NTP OR OSHA AS A CARCINOGEN.
Effects of Overexposure:MAY CAUSE IRRITATION TO NOSE, THROAT OR LUNGS.
ALSO MAY CAUSE SKIN AND EYE IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MIN., CONSULT PHYSICIAN. SKIN: WASH AFFECTED AREAS WITH
SOAP AND WATER. INHALATION: REMOVE TO FRESH AIR. RESTORE/SUPPORT
BREATHING , CONSULT PHYSICIAN. INGSETION: CALL PHYSICIAN
IMMEDIATELY.

Fire Fighting

Flash Point Method:SCC
Flash Point:NONE
Lower Limits:1.1%
Upper Limits:14.4%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:MATERIAL WILL NOT SUPPORT COMBUSTION. USE
WATER TO KEEP FIRE EXPOSED CONTAINERS COOL TO REDUCE PRESSURE.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM HEAT.

Accidental Release

Spill Release Procedures:AVOID BREATHING VAPORS. VENTILATE AND REMOVE
WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE OR USE NEAR HEAT. DO NOT
GET IN EYES.
Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF
CHILDREN.

Exposure Controls

Respiratory Protection:APPROVED MASK OR RESPIRATOR FOR ORGANIC VAPORS
AS NECESSARY.
Ventilation:ADEQUATE VOLUME AND PATTERN TO AVOID VAPOR CONCENTRATION IN
EXCESS OF TLV OR LEL.
Protective Gloves:GLOVES ARE REQUIRED FOR DIRECT CONTACT.
Eye Protection:SAFETY GOGGLES/GLASSES WITH SHIELDS.
Other Protective Equipment:WEAR PROTECTIVE CLOTHING WHENEVER POSSIBLE.
Work Hygienic Practices:DO NOT TAKE INTERNALLY.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:338F,170C
Vapor Density:>AIR
Spec Gravity:1.0
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETE
Appearance and Odor:MILKY APPEARANCE WITH A SLIGHT ACRYLIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT, CORROSIVE ATMOSPHERS,
EXCESSIVE AGING.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.